Desertcart Logo

Q: Has anyone tried this bulb on an BMW G650GS? I am a bit concerned it might fry the wires, reflector or lens.

You MUST use 12g stranded wire with quality insulation to each h4 socket terminal. You MUST use Ceramic High Heat HD socket. You Must usea relay that is 20% Higher rated than the max amp draw. Your altenator or generator must have the added capacity so to cover the increased draw@ idle of these lamps or they will draw down the battery. If smaller wire or alt capacity there will be voltage drop which increases amp and thus heat. For 1 light on a bike figure for 13.5v to be safe which adds to 9.6 amps. Use a 15 amp relay. For high low you need 2 relays use two 15a or 1 15a hi and 1 10a lo. If its 2 for a dual lamp or 4wheel vehicle double Watt so 260w÷13.5=17a. Best use 25 or 30a relay for high and low. Ideally use a dual output relay so 1 12g lead to each bulb from relay term not daisy chained. Ideally run 10g from battery or alt post to relay input. Built like this you will never have a capacity or heat issue when in good condition. YOU CAN NOT USE ANY STOCK WIRING HARNESS!! NOT EVEN MOST PREBUILT HD WIRING HARNESS. If you follow the above general guide with properly crimped connectors it will not only not burn up but 2 Will have much higher light output. Remember a 5% drop in voltage = a 15% drop in light output 1:3 ratio. Ideal voltage is 14.5V on 12v systems.

Q: I have an original stock headlight. Anything special i need to do to use this bulb?

The current draw with this bulb is more than stock so after having the lights on for say a 30 minute drive in warm weather see if the connector at the bulb is hot as well as the wires going to it with the lights still on if so you should install a hevi-duty connector and wire kit. My jeep 2005 wrangler handled these bulbs just fine and I think most vehicles will need nothing.....DBW

Q: I have a 1998 Kawasaki Vulcan 800 Classic. Any need to upgrade anything electrical or does this simply replace the stock bulb? Thanks

Oh yeah. You should not just plug this in and go. These bulbs make a ton more heat than a stock 55/60 bulb. Buy a ceramic plug as well, otherwise the stock pug will just melt over time. I think I paid maybe 12 bucks for 2 ceramic H4 plugs on Amazon.

Q: Will these work on my motorcycle? it's a 2004 bmw r1150r, and h4 is stamped on the glass plate of the light housing

The h4 bulb will fit, May want to check the wattage they get kind of hot. There is a lower watt bulb too I believe.

Deliver to Panama

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

💥 Light Up Your Journey with Hella!

SAFETY FIRST - Optimized filament design ensures a wider and brighter light for safer night driving.
TRUST IN QUALITY - Original equipment quality from a leader in automotive lighting for over 100 years.
DURABILITY GUARANTEED - Produced under stringent testing for long-lasting performance and customer satisfaction.
ILLUMINATE YOUR DRIVE - Experience up to 50% more light output for enhanced visibility.
PAIR UP FOR PERFECTION - Always replace in pairs for a symmetric light beam and optimal road illumination.

The Hella H4P50TB +50 Performance Bulb offers a significant upgrade in lighting performance, providing up to 50% more light output than standard bulbs. Designed for safety and comfort, these bulbs meet global standards and are backed by over a century of automotive lighting expertise. With a focus on durability and optimal fit, they ensure a reliable driving experience, especially at night.

Specifications

Brand	Hella
Specific Uses For Product	Headlight
Item Package Quantity	1
Color	silver
Auto Part Position	Front
Manufacturer	HELLA
Global Trade Identification Number	07502278672192
Item Weight	1.76 ounces
Product Dimensions	4.72 x 2.36 x 5.91 inches
Item model number	H4P50TB
Manufacturer Part Number	H4P50TB
Mirror Lighting Type	automotive-exterior-headlight-bulbs
Voltage	12 Volts

Have a Question? See What Others Asked

Has anyone tried this bulb on an BMW G650GS? I am a bit concerned it might fry the wires, reflector or lens.

I have an original stock headlight. Anything special i need to do to use this bulb?

I have a 1998 Kawasaki Vulcan 800 Classic. Any need to upgrade anything electrical or does this simply replace the stock bulb? Thanks

Will these work on my motorcycle? it's a 2004 bmw r1150r, and h4 is stamped on the glass plate of the light housing

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

B/.62

Duties & taxes incl.

Panamastore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

View all Trustpilot reviews

HellaH4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1)

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions