BAZIC Silicone Glue 3.38 Oz. (100 mL), Waterproof Crack Resistant, Quick Repair for Glass Window Plastic Kitchen, 1-Pack

Great silicone adhesive , works well via the small hole that one can make in the spout . Very strong but one should let it fully cure for more than 24 hours if you want to expect its full potential

Era exactamente lo que esperaba, gracias por la entrega en tiempo satisfactorio

I bought Bazic silicone adhesive well over a year ago, and have used it successfully in numerous craft projects and small home repairs. The most recent repair job—and the one that finally prompted me to write a five-star review—was getting a much-abused refrigerator interior back in shape.I bought a house that had a working fridge, but most of the plastic interior shelves and drawers were so badly broken, they were nearly unusable, and the gasket around one door was falling off. Honestly, I've never seen a refrigerator with such a beat-up interior, and it was old enough that the fittings were impossible to replace.Not wanting to spend money right away on a new fridge, I decided to try putting the broken interior fittings back together. I chose Bazic silicone adhesive because it doesn't stink as bad as E6000 or similar adhesives, and it cures quickly. I also needed something I was sure would withstand the cold, damp conditions inside the refrigerator and freezer, not grow mold, and not be affected by cleaning products.I unplugged the fridge, thoroughly cleaned every surface in, on, and around it, let everything dry completely, and then used Bazic silicone adhesive to repair it all as best I could, holding everything together with blue painter's tape. I let it all sit for 24 hours at room temperature before reinstalling everything and plugging the refrigerator back in.There were some pieces that had broken off entirely and were missing, and I couldn't do anything about that, but I did get the cracked and loose drawer fronts back on, and mended the plastic frame that goes around them (which had a huge, jagged crack all the way across it). The shallow, full-width drawer in the freezer is still missing its entire front edge, but I mended the big cracks in the bottom of it.Nearly six months later, all of my repairs are still holding up just fine, in a refrigerator that gets regular use. There were some repairs I thought might not hold under the stresses of normal use, such as the cracks in the bottom of the freezer drawer, but they are still going strong, which has been a very pleasant surprise.I still want a new fridge, but the one I have is perfectly useable for now, and probably will remain so for a long while to come. I was already impressed with this product, but it's performance at keeping my fridge held together takes it to a new level. Thank you, Bazic!

I used this glue to build a miniature dollhouse. I used it on materials ranging from wood, plastic, paper, felt, twine, cotton, metal, fabric, and others I'm probably forgetting.Things I liked about the glue:1. Dries clear2. Does not dry right away, so if you mess up your positioning, you have a good few minutes to fix it.3. Once dry, the adhesion is nearly as strong as super glue.Things I disliked:1. Because it takes a long time to dry, sometimes I had to hold a piece in a certain position for 5-10 minutes to give it a chance to adhere.2. The waiting time in drying sometimes meant I couldn't move on to the next step of the project.3. There is only one large applicator. I was working with tiny pieces, which sometimes made the glue hard to control and very stringy when trying to separate from my items.All in all, it held my project together really well. I didn't even use any other type of glue on the entire project. I already purchased a second bottle for my next project, even though I still have half a bottle left of this one. However, I bought some applicators separately for when I'm working with small pieces. I also bought some crazy glue for when I need something to dry fast.

I used this to mend a cracked fridge deli-drawer, and it worked great

Satisfied 🥰

Only needed this for a single use, which was to glue bird repellent pods outside. The glue is holding strong through all kinds of weather. Downside: Couldn’t figure out how the cap worked- I had to screw off the entire thing instead of opening the tip and squirting the glue out. It was pretty annoying and the glue that got on makes it impossible to open the cap now.

We used this to attach a piece of art made of resin to the exterior of our house. It set up quickly and is holding the little guy on tight!