Garage Stop 2X for 893LM 893Max 891LM 371LM 373LM 971LM 973LM LiftMaster Craftsman Chamberlain Garage Door Remote, for 5 Learn Button, Garage Door Opener Remote

The video is not simple, programming the remote is simple. First, figure out what color your learn button on the actual garage opener is, the one hanging from your garage ceiling, it will be blue, green, red, yellow or purple. Check the chart in instructions for number corresponding to each color. For example, purple was two. Then choose the button on remote you want to program, use the clip that comes with remote by inserting in slot found in back of remote, till the light goes on on the handheld remote. Then press the button you chose the number for your color. So for me, I pressed the handheld remote long button twice for purple. This made remote go into programming mode. Then press any of the other two buttons, that are not the button you chose to program. So in my case, I pressed one of the short buttons. This gets it out of programming mode.Now press the "learn" button on unit hanging from garage ceiling. It will stay on for thirty seconds. While that light is on, press the button you chose to program. In my case, I pressed the long button. The light on the garage door opener will come off/on. That's it. Done.

The garage opener remote came with instructions on how to program the remote to the opener. I tried several times according to the instructions to no avail. I had never attempted this before. I had to use google and you tube. I did not know what the learn button was. I used you tube to identify. Then I found a video that was more clear for me. I followed and programmed accordingly. It was easy once I identified the terms meanings and locations.

Great controls! It has the prong in the back which personally made it easier for us to connect with our garage opener. I tried another brand since I just needed one single one however it did not have a prong nor did it have a video on how to connect it which I ended up returning. I ended up buying a second pack from this brand again and I haven’t had an issue since. They are connected easily and it’s good quality.

Great devices easy to program with a lift master opener. One issue I had is mounting the clip, it would not easily slide in the back of the opener. What I did is place a narrow piece of painters tape, covering the small raised dimples so I could slide the clip into position. All is good

These garage door openers work great and were incredibly easy to pair with my older Craftsman opener—setup took less than a minute. The signal range is solid, and the response time is quick and consistent. I was pleasantly surprised at how well they worked for the price.My only gripe is that the buttons rattle while driving, especially when clipped to the sun visor. It’s a small but annoying issue, so I’ve opted to keep mine in the glovebox to avoid the constant noise.That said, the performance and value definitely outweigh the minor inconvenience. If you're looking for a budget-friendly replacement remote that does the job right, this is a great option.

Great product. I was able to program both of them to my door. The video attached to this product on Amazon explains the process perfectly. It was a minute process, following the video on this page and you’ll be fine.

Super easy to set up, and a great price. We got one for every car, and it’s amazing! Havent needed to replace any batteries, and the range is pretty good too. We love it.

During setup, I was a bit confused on how to program. Typically, I've pressed and held the button to program. The Remotes use a button in the back and there is a progression to the programming. I had to read the instructions multiple times to get it right.Similarly, one of my garage doors is much older. The button on the back was so faded that I had to guess when programming. Luckily there were only 4 options so I was able to get it worked out but that took longer than I expected.