RT-TCZ for Wrangler Hood Latch Lock Catch, Aluminum Hood Latches for Jeep Wrangler JK JKU 2007-2017 JL JLU 2018-2025 Gladiator JT 2020-2025 Black Exterior Accessories 2pcs

I knew I wanted to get more secure latches, but I'd only think about it when I was driving down the interstate watching the hood bouncing up and down precariously secured by thin rubber latches. Not the best time to do some online shopping. I finally remembered when I was at home, and after some research, chose these latches. The reviews looked good, the installation seemed easy (no drilling required), and while the price was higher than others I found, this was not an area I wanted to skimp. I can't imagine sitting on the side of the interstate with the hood in my lap thinking, "at least I saved $20."I was not disappointed. The installation was a snap. I set aside an hour and was done in about 20 minutes. All the holes lined right up. I did end up using the original screws after reading other reviews since they have the washers integrated on them. By popping off the grill, it was easy to wriggle the socket wrench in to place for the bottom bolt. One side was perfect, while the other required just one adjustment to get the fit just right. The only reason it took as long as it did is because I installed the part that goes on the hood upside down. Oops.The real test was the interstate. Zero hood flutter. The fit is secure. And besides, they look great - really beefy.The only con I have is that, after opening and closing them a couple of times, I noticed some of the powder coat scratching off on the inside where the two sides meet. It's nothing you'd notice when closed, so doesn't affect it cosmetically, but something to be aware of so you don't scratch the outside with tools.

I have a 2013 Rubicon, have lived in Florida and Nevada all 10 years of ownership, had to replace the rubber latches every 2 years in that sun. I've only delayed doing this because my bumper system makes taking the front grill off nearly impossible and I didn't want the install hassle.Two of mine blew out on the same day - had to replace. And the Dealership charges $88 per strap (176 for both)!! For more rubber straps..... So off to Amazon I go.I bought these because they are stainless steel, I couldn't get comfortable with aluminum and noticed that most of the top 4wheel vendors make steel rather than aluminum latches.Easy Install - see the pic, these are the tools I used and I did NOT remove my front grill. Took 30 minutes start to stop. I used a 10mm and 13mm socket, and a 4mm and 5mm ball head allen wrench.The trick was to use 1/4 inch socket with a small (tiny) wratchet to reach the bolt (see pic). Easy off.To install, you don't try and thread the nut to the bolt, you hold the nut over the hole with your fingers and then thread the bolt from the outside - that way you just hold the bolt in your fingers and all the turning is done from the outside using fingers or allen wrench.AdjustmentsEasy adjustment, loosening the top hood bolts and sliding latch up or down 1/2". I was worried about adjustable latches that they might droop over time, but in my case, the top latches required me to adjust as low as possible to fit, meaning they are already as low as can go and cannot move any lower to come loose.Note you do have to transfer the rubber bumper from the original to these, it just comes off by gently twisting sideways and then install in same spot on these.The nylon lock nuts assure work will not come loose from vibration.All in all, impressed with quality and sturdy.Only Concerns:Although the bolts look big, they are held in place by 1/4" stainless steel screws on each side (the silver bolt heads in the pictures). That is not a through-bolt but screws holding a bolt in place. That means the sheer strength of these latches is on those screws, not the bolts. Remember, all of this is steel, and the OEM are rubber and plastic, I believe will be better. Will update my review after some highway miles and offroad miles.

I got these about two weeks ago and wanted to actually use them before leaving a review. First, my OEM latched were worn and the hood fluttered even in the slightest wind, then the adjustable aftermarket replacements I got were hard to set to the proper tension and not long before they just crapped out.These latches came nicely packaged with everything you need to install them. The install took about 30 minutes which included a moment to crack a beer when my neighbor came over to see what I was installing. One thing you need to be aware of is if you have fat fingers as I suppose I do reaching into the behind the quarter panel to hold the nut can be a problem. However, that is not a problem with the latch itself just a heads up. I was prepared for this so it was expected.The latches are well made, sturdy and while adjustable have few moving pieces, this was important to me because while my last latches were adjustable and looked cool they had way too many pieces which caused multiple problems. I've driven in high winds on the freeway and in canyons and offroad on some pretty hard trails, my hood never once fluttered, come out of adjustment (it really can't) like my last set and or appeared as if it wanted pop off. I love the way they look and even more so the ease and dependability of them.

Great sturdy product and looks much better than the stock JL latches. I took off one star for the terrible instructions, written in broken English and way too small to read. It was a hassle trying to understand what they were describing.

I absolutely love these. They look so good on my jeep. So much better than the rubber hinges covers. Also, I like the fack you can adjust them. They keep my hood closed tight. No more bouncing.Easy install