X AUTOHAUX No.1456980 Rear Axle Lower Control Arm Camber Adjust Cam Wheel Alignment Bolt for FORD Kuga Mk1 2.5 2008-2012 for FORD Focus Mk2 1.6 TDCi 2005-2011

Was a perfect fitment for a set of bolts that wasn’t carried at any of the local parts stores.

The bolts looked okay but that's where it all ended. The groove that was put into the bolt was put in the wrong location, my husband thinks that whoever was making it didn't realize it had to be oriented specifically to get the correct offset due to part design. Then he fabricated his own washer to make up for this and the threads completely disintegrated with very few foot lbs of torque. Not a good product

DO NOT BUY THESE. They have multiple problems. 1) the cam lobes are 90 degrees out of phase from what they are supposed to be. The eccentric lobes should be inline with each other so they can properly adjust camber but they cut the broach wrong in the two peice design so they don't line up. 2) These are listed as stainless steel, they are 100% not and just have a zinc coating. They will rust and seize in the bushing so you can never adjust them again after the first time. 3) The nut provided with these are significantly thinner than the factory nut. When trying to torque them down to the required 85 ft lbs the nut completely stripped which resulted in me having to cut the brand new bolt off since it couldnt be torqed properly and the nut would no longer unscrew.This is when I realized they lobes were out of phase or I would have never installed to begin with. I know the others are a little more expensive but go with the Dorman or another brand because these WILL NOT WORK properly even if you successfully install them. They have multiple problems in their design and are the epitome of Chinese crap. Whoever tried to back engineer the original had no clue what they were doing.

worked great