Water-Proof Junction Box PFA130-E for Dome and Bullet Camera

I used 4 of these to for outdoor Lorax fusion cameras. I was very impressed with the heavy metal durability, compared to a previous plastic one I ended up returning. This box came with all the screws, hex tool and a set of basic anchors to make for a secure installation, however, you may need other anchors, depending on your install.i was alo impress with the metal hinges and cable, allowing you to:1. Mount the box first2. Remove the lid, and mount the camera to it, then3. Attach the lid to the box and screw in.This really is a quality box.The gaskets are on ALL included screws and covers, eliminating the worry of moisture entering the box and ruining your connection. The 3 holes on the cover lined up perfectly for my cameras. The box is a 3 hole mount, although you may only need 1-2 good holes with good screws.Be sure to mount the box at the correct spots for your particular camera field of view BEFORE you mount your camera. I had to re-drill a few holes in stucco once to achieve my desired camera angle.

The home we just purchased came with old small junction boxes. These new upgraded boxes fit the bill nicely. The fact this came with all the hardware and tether to hang the cover while installing was a big plus. This was the perfect size to fit my Lorex cameras in my home. The tether allowed me to hang the cover and camera (already mounted) to finish up tidying the ethernet cables in the box itself. Once that was done I simply placed the cover and my camera and tightened down the screws. This made install quicker and easier for me. I would recommend if you have Lorex cameras!

This is as good as it gets for a camera mount. The entire unit is extremely well thought out, sturdy and made out of metal.- All needed screws are included, along with tools for the hex heads- The "lid" has a tie cable to the main enclosure so it can hang freely while installing it.- Screws have a small rubber gasket that serves double duty a retainer so they don't fall out while you are working + seal the box when tightened.- Threaded knockout can be moved if you want to use a side feed instead of back feed.- Mount holes were in a pattern that perfectly fit my DH-IPC-HDW3549HP-AS-PV on the 3rd largest "ring".- Included a paper/sticker mount template for pre-drilling if you wantMy only small gripe was that the threads were a little tight, but running one of the included screws through each before ladder-time got them cleaned up, not worth knocking off a star.

This is one of the worst products I’ve ever bought on Amazon. The edges are rough and look like it was made with zero quality control. It seriously looks like a defective item. The screws won’t tighten properly and the whole thing feels cheap and flimsy. Installation was a nightmare. Don’t waste your money on this junk. Absolutely worthless.

Look, its well-made. However, the description and Amazons engine tried to make it sound like it is compatible with the camera's I bought. Does not work or fit REOLINK RLC-1240A or REOLINK RLC-811A bases. It Lanes between the screw location for RLC-811a and the RLC-1240A has a well-integrated base but neither its screw holes fix nor the Wire does not come out in the center in a way that works with the depression for routing said wire.The unit itself was well made, Plenty of extra Parts. Now if it only fix.

Needed a universal box so I didn't have to spend four times as much on a manufacturer box for the cables that didn't have attic access. It was big enough for a full sized dome, and I was able to drill my own holes in the faceplate. I threaded the holes with a spare screw, and cut the screws I used extra short so they wouldn't protrude into the cable underneath. The 3/4" threaded holes made it easy to use a 1/2" adapter and 1/2" waterproof cable fitting, and I angled the hole downward to prevent water ingress. I did have to remove the screws and tether wire for space. Of the three boxes I used, all are working well, but make sure you double check the tightness of the threaded caps before installing.

I tried them all, this one is the best and the price is right.

Seems to be built pretty well. The screws provided have rubber gaskets to prevent water from entering. The top has plenty of holes to accommodate different mount arrangements. The screw holes for mounting cameras are not drilled completely through the top so it remains water-tight. Mounting hardware included.