BONTEC Dual Monitor Stand, Adjustable Arm Desk Mount for 13-27 Inch Screens, VESA Mount, Full Motion Tilt & 360° Rotation, Max 10kg per Arm, Height Adjustable, Easy InstallRecycled Claim Standard Blended

As someone who utilises several monitors for work, I wanted to reclaim desk space, without having to drill a load of holes in the wall for wall-mounting my screens. Enter this monitor stand.I had a couple of concerns. Firstly the top of my desk is a couple of inches thick and I didn't want to drill it, so would the clamping capacity of the mount be enough? Secondly, I was planning on mounting two 27" screens, which although not ridiculously heavy, aren't light either.I should not have worried. Firstly the hardware supplied with the mounting kit is ideal, including everything you need to get up and running and there is also a holder built into the cable management for the allen keys, so once assembled you can keep them handy for adjustments. The clamp fixes the mount to the desk very securely, holding the vertical post very nicely. The horizontal arms then attach very nicely, with plenty of adjustment vertically, so if you're mounting large monitors, you should have lots of space. You can then route the cables along the arms and down the vertical post.Overall, it is an excellent piece of kit. It only really does one thing, but it does it very well. If you have screens that are much larger than 27" you will end up using most of the horizontal travel in the arms, so you won't be able to pull the monitors very far forwards, but if you want to reclaim your desk space and mount your monitors without having to drill holes in anything, this is the way to go.

Easy setup feels solid and looks nice at a good price. Would be nice if it came with a 10mm spanner for the lock nuts. Instructions were clear with all the kit present.

Very sturdy and quite simple to assemble. The instructions are clear, and there aren't many places you can go wrong. The pivot points are very stiff out of the box, but can be adjusted with some effort using the Allen key (I put in a lot of effort, even thinking it would snap at one point). While listed as "height adjustable", this refers only to the vertical height of the dual arm. Your monitors will not be able to freely move upwards and downwards. I have two different brands of monitors, so when both are mounted, they do not line up at all. I'm a little disappointed by this, and it could have been clearer from the images. Rotation works smoothly however, and having one vertical monitor does eliminate the alignment issue a little. Very solid for the price, but do be careful if you have mismatched monitors (different resolutions etc.) as they will likely not line up.

Putting this together felt a bit like a puzzle—some fiddly bits —but once you crack it, it's perfect. Once assembled, it’s rock solid: think steel‑heavy build, zero wobble, and a reassuring lack of chipped paint. I fitted it through a desk hole, but the bracket included to clamp it looked equally sturdy.Adjusting the monitors? Adjustments are robust, perhaps a tad too rigid if you expect swivel-on-demand, but, when it’s in place, it stays in place.Cable chaos was tamed nicely thanks to the clever cable‑management clips and handy Allen‑key hooks built into the stand. Thoughtful design, I’d say.In summary:Pros:Super sturdy and stable—once it’s up, it stays with no wobbling!Clean, tidy cable routing and tool storage.Great value for the price.Cons:Assembly is a little fiddly.Adjusting positions isn’t as fluid as some higher-end gas‑spring arms.If you don’t mind a bit of effort during setup, you’re rewarded with a dependable companion for your monitors and clearing space on your desk for you to work.

I wanted a second of my LG Ultragear monitor but the one stand took up enough desk space let alone two. I went searching for dual monitor arms. I needed this type (not the spring armed one) so I can have it flush against the wall and can have my monitors how I want. This was surprisingly cheap and I'm very pleased with the sturdiness and quality.Installation with simple and instructions were clear and simple. It offers loads of adjustability in terms of Swivel, Tilt, Angle EtcIt holds my two 27' monitors rocksteady. Although I would recommend setting your monitors how you want and then tightening everything down for safeties sake.I paired it with the BONTEC Steel Monitor Bracket Reinforcement Plate to help keep everything more stable, Spread the weight and to protect my desk.Overall I'm very pleased with the product and I would consider Bontec again in the future