2 Pcs Brass Locking Tire Air Chuck, Tire Inflator Hose Adapter for Twist On Connection Convert to Lock On, No Air Leakage Air Compressor Pump Clip On Tire Chucks, Tire Nozzle with Tire Valve Thread

Years ago I bought a cheap portable tire inflator but I never liked using it. The reason I didn't like it was because the air hose had to be screwed onto the valve stem. If I didn't cinch it down tight, it would leak and take longer to inflate the tire. The worst part was trying to unscrew the hose. By the time you got the hose unscrewed from the valve stem, a lot of air had been lost. The workaround was to over inflate the tire and then hope the subsequent loss of air would bring the pressure to the normal point. This just got to be too much of a hassle. I was talking to a neighbor about this who was having a similar issue with his inflator and we bother wondered if an adapter might be available. What a pleasant surprise to not only find out they exist, but that Amazon has them at a great price! I bought a pair of them and gave one to my neighbor. Problem solved for both of us. This adapter screwed onto my inflator hose with no issues whatsoever. It was the perfect size and fit. It has now sped up the time it takes to inflate a tire because I know longer have to waste time screwing the hose onto the valve. This adapter clips securely over the valve stem and creates an airtight seal. Now I can top off my tires a lot faster. These adapters are good quality being made from solid brass. They should last a long time. I was half tempted to by a better inflator, but that would have cost a lot more than these adapters. This was a very inexpensive fix. I am very pleased with these adapters and highly recommend them to anyone having similar issues with their portable tire inflator.

Put this on the milwaukee m18 inflator. Screwed right on and works perfectly. Seals tight and saves a bunch of time. Love it

They seem to be a really good product for what I was looking for, I should have paid closer to attention to what I was ordering I would have made a different choice

Worked as advertised. Turns a Harbor Freight 12V air compressor with a challenging to use valve attachemnt into an affordable easy to use air up system for those of us who are not hard core off roaders but have the occasional need to air down and up.

This hooks up great and is so convenient for my Milwaukee air compressor. Quick release is the way! It may take a couple of tries but works well once you lock it in.

This is a great little item and two for the price of one. Not having to screw and unscrew the hose to the valve. It's like having an extra set of hands. Love it!

I replaced a worn out chuck with these. They looked pretty impressive in the pictures, nice machined product with minimal plastic.However once installed they proved to be very poor replacements. First, you have to provide all of the seating force to seal the chuck on the valve stem. Additionally it does not guide itself on in the proper angle to seal the air in, I had to hold it during the entire time as the slightest angle change would let the air out.Another point of failure is the latch which uses a blade like edge to engage the threads of the valve stem. It does not have a strong grip since it only contacts a small arc of the valve stem threads. If it was tighter it might damage the threads.Finally the part that connects to the hose unscrews. This wouldn't be a problem except it decided to do it while trying to inflate a tire. In my case I had less air in the tire after the inflation due to the various leaks this thing has.Perhaps with more familiarity the success rate would increase, but I purchased quick connect chucks to save time, not require an extensive learning process to use. If there is a secret to using it then some instructions may have helped. I replaced them with more traditional ones and these are headed for the trash.

Well made. Fabrication and tooling superior. Works every time with minimal effort.