ionz IZP14 Kit - 2 Grams - Ultra High Performance Thermal compound, 13.8W/mK Heatsink Paste 2g For All CPU/GPU Coolers

Now I have to say I was not expecting much from this paste, my intention was to buy it to use temporarily as it was quick delivery, then later source some thermal grizzly stuff as I had heard good things about it. However this paste is actually brilliant, I run a Ryzen 7 5800X which is cooled by a Corsair H100i Elite Capellix Cooler, and my temperatures are absolutely amazing. When booting up the system and it being idle, I am seeing idle temperatures as low as 33 degrees celsius, once the coolant in my aio warms up a bit it stays at about 35-38 idle however. But full load temperatures are no more than 70 degrees. Which if you didn't know is insanely low for the 5800X as the voltage and boost behaviours are known to make it a bit of a volcano without good cooling. Keep in mind I do have a voltage offset of -0.150 in bios though.Overall, I believe this paste has top end performance and the price is impressively low. If you are wondering whether to buy this paste or not. Do it, It is really really good.

Bought this to re-paste an old MSI GT70 Dominator laptop and it has reduced the CPU and GPU temps by a fair bit (I also replaced thermal pads). This also means the laptop fans don't have to ramp up as often.This stuff has a good thermal conductivity rating, is easy to spread and comes with everything you need including wipes, spreader and some templates if you need them.Great stuff and recommended.UPDATE: I've just repasted my own laptop using this stuff for the CPU & GPU and it's lowered the load temps by over 10C which is a great result! My Asus TUF F15 was always hitting nearly 100C on the CPU and over 80C on the CPU, now the CPU reaches around 86C and the GPU stays under 80C when gaming. This Ionz paste is performing better than the Arctic MX-6 stuff I applied not long ago. I also used K5 Pro thermal putty for the VRM's and GPU memory.

This is OK thermal paste and I used it a s a replacement. Temperatures for me don't go above 65° Celsius for me when under a load. No concerns or problems with me.

I normally use the Arctic MX-5 but after taking off the CPU to upgrade it it seems to have gone hard on the CPU and it was difficult to separate from the cooler. This however is easier to apply, spreads well and has better thermal conductivity than the MX. It also comes with a small spreader which is handy. Keeps my Ryzen 5 5600X with a Scythe Mugen dual fan cooler cool and even when intensive gaming for several hours it only averages around 65c and has never gone above 68c. Just looked while writing this and it's idling at 33c.

I used this for a new cpu upgrade (i7 4790k) as I didn't have any about. The temperatures are good to great so I can't complain, nor would I have done thoughour enough testing to do so.The tube is easy to use, dispensing the amount it tried to easily and sealing well enough I could use it again a year later for another build.

I like this!Very good for user

After the pain of trying to spread Thermalright tfx which is impossible, I thought I'd take a chance on this unknown product.Immediately it was apparent this paste had a perfect consistency to easily spread over my Ryzen CPU. A small spec of fabric fell on the CPU as I was applying it and so had to remove the spec Grrrr! even then I was able to spread once more very easily.Most importantly my temperatures are now stellar. Playing the Witcher 3 and even Microsoft Flight Sim 2020 wasn't able to get it over 60c, where as the previous paste was almost 70c at load. With my Be Quiet Dark Rock Pro 3, at Idle, the lowest I recorded was 31c, now that is really impressive and I was not able to achieve anywhere near that with MX4 or the TFX.As an experienced PC builder of performance gaming rigs and a perfectionist, I recommend this product without hesitation.

Great paste and really easy to apply.Got my 3060ti temps down from 79 to 71 under very heavy load.