Double Conductive Tape 2inch x 50Feet Faraday Fabric High Temp Tape for Electrical Repair, RFI/EMI Shielding, Car Wire Harness, ESD Grounding, Seal Precision Components, Guitar Interference Blocking

The tape came quick and as ordered. It is exactly to isolate low voltage from high.

Ducttape. Multi purpose use.* Close moving boxes bottom? Holds the weight.* Fix a travel bag? Maintains full flight transport handling.* Hide cables under the table? Won't drop.* Tape a banana to the wall? Go for it, copy-cat.* Turn every NO-NO-NO into a near silent hmmmm? Yep, but do with consent only.* Tape ducts? I guess. Didn't use it for that purpose yet.

Great product.

I used this to wrap a sensor wire pair under my hood. It's sticky enough to stay, but is POSSIBLY to re-adjust. It doesn't want to move again, but is possible. I wrapped about 8' of tape, rolled the ends and put female spade connectors on both sides, then tested conductivity from connector - connector: < 3 ohms across the length. IDK if it will solve my shielding problems but it definitely conducts over a long distance and remains flexible.

I used the tape to eliminate the EMI/RFI transfer from the ignition system to the stereo in my Corvette. It worked great. I can listen to the stereo without the static from the ignition system.

I cut this tape across its width @ 1/2" and use it when making Shielded Ethernet cable to ground the cable to the RJ45 connector. After I strip the Ethernet cable, I wrap the ground wire down around the outside cable cover, then I take a piece of this tape and wrap it over the top of the ground wire. Then push on a shielded RJ45 connector and crimp. I have ohmed a great many of these cables end to end after making them and all have shown less than 0.2 ohms depending on length.

I really liked this cloth and tape. I covered my exterior cameras and WiFi lights from local hackers and the nonsense has stopped.

Price was right and covered all my wires giving off efi. Seemed to work as my issue has been resolved.