Replacement Parts for Shark AI AV2511AE AV2501S AV2610WA AV2501AE RV2502AE RV2610WA UR2500SR RV2520 AV2510 Accessories Kit with Main Roller Brush Filters Foam/Primary Filter Sweep Side Brushes

These parts fit perfectly. It was a guessing game which part number was correct since nothing matched the Shark I’d bought at Costco. In one set of replacement parts that was supposed to be the same as these but were much cheaper the roller door didn’t fit. These fit. Wish they were less expensive but it appears you get what you pay for. My robo vac is now happily working same as out of the box.

This is an all-in-one kit for a group of different models, so not all parts will work with all models. For my AI (don't have the exact mode #, but I bought it from Costco), that meant the black filters are useless, but I believe every other part will work.I bought this kit because our model is around 1.5 years old, and I keep getting "dust bin not installed" or similar errors. From experience, I find these are usually related to a clogged filter, or rather the base tries to suck the debris out of the vacuum unit, and senses a low pressure differential which it then INTERPRETS as something not being installed. This is particularly frustrating when you're trying to solve a problem! I was also getting a fair amount of the vacuum "flap" on the vacuum unit being propped open with small debris that should otherwise be cleared out - that was also a signal that the base just didn't have the ability to empty the vacuum unit.All this said, there are a few filters in the unit which you need to clean regularly depending on what you have in your home. For us with a husky, that means cleaning things a couple times a week. Don't forget the filter in the base unit that's under a cover on the top left side!At any rate, our unit was getting tired - in addition to the filters, the beater bar was also..... beat. The bars in this kit fit just fine, and I anticipate that the unit will clean better, as our old beater bar was so worn I doubt it really brushed the floor like it should.For the cost I think this is a great value.

Happy with all the replacement parts. I was looking for a new roller, but settled on this double roller replacement pack, along with all the other filters and replacement parts. I put the new roller in, and the air filter and filter screen, and replace the side brush. I also used the new cover it came with, and replaced the filter in the dock as well. I have enough left over to do it all again a couple times over too!I realized how good it was to do after I saw the state of the filter in the unit! It was good to know we just removed it and replaced it with a brand new one!I did notice a little extra regular noise coming from the unit after I replaced the roller. I may have not secured it in correctly. I know that it fit just like the old one did, so I'm not sure what it was. It works just fine though.

The entire kit was great and works well. Easy to change filters. Great value.Minus 1 star for the brush rollers that tend to bind on themselves. I am actually addressing stuck roller issues much more now than before.

This kit has all the components I needed for my vacuum at a good price. This got my vacuum working like new again.

I buy this set every six months or so to keep my Shark Robot Vacuum clean and in good shape. All the pieces fit great and work well.

I bought this kit for replacement parts for my Shark AI ultra robot vacuum cleaner RV2502AE. When the robot cleaner was 1 year old, I tried to replace the OEM roller brush with the roller brushes from this kit. Both replacement kit roller brushes caused the robot cleaner to shut off after a few seconds, with the error that the roller brush was stuck, not spinning. I had noticed that the replacement brushes did not rotate by hand easily but the old OEM roller brush did. Luckily I kept the OEM roller brush. I found the replacement brush works fine (I think) after removing the caps from each end of the brush and replacing them with the OEM caps. Because of this problem with replacement roller brushes, I am skeptical about all the other replacement parts in the kit, and I am concerned the filters will shorten the lifetime of the robot cleaner motors. Lesson learned: buy Shark replacement parts, not third party. Savings are not worth it in the long run.

Some of the parts need extra "help" getting into place and do not last as long as the original parts. They fall off and I have thrown some away because they just did not fit and grabbed another from the set and it worked. I have no idea why one will work and one won't other than quality control is lacking. So you WILL go through these much faster than OEM, but they Still are cheaper so I will buy again. I just wish I did not have to replace these as often and that they all were of the same quality. The quality is definitely sub par. I placed another order asap upon putting my new brush roll in because it is so tight that I do not think it will work. I had to toss the last one after 3 months- It was shredding at the webbing and clogging the machine.