UnderCover SwingCase Truck Bed Storage Box | SC104D | Fits 2019 - 2023 Chevy/GMC Silverado/Sierra 1500 Drivers Side, Black

I just purchased and installed the set for driver and passenger side storage units. The installation is very easy and takes just minutes! If you're not sure on the instructions, there are plenty of videos on YouTube showing how. As for the storage units themselves, they look like they should hold up for years of handy use. There's a decent amount of capacity and it also has a small removable shelf that can be stored on the top of either end of the unit. The best thing is how handy these are. There's a lever on the outside bottom, when pulled allows it to fully swing the unit all the way to over the tailgate making for very easy access. Also, these units are totally removable themselves! Which is a handy feature if for some reason you nee to use the full bed of the truck for a project. Once done, they simply reinstall in seconds. The units themselves are lockable. There also comes with the unit, a separate piece which installs in seconds that prevents removal of unit while this piece is in place. It can be removed quickly and easily to allow removal of the unit again. I also have a hard retractable tonneau cover which locks along with the tailgate. The storage units are designed to fit even if you have a tonneau cover plus they set a little off the bed of the truck. Overall, these are very handy and well thought out, I only wish I could have purchased these a long time ago!

Really alot easier to install than the ones for my 2015. These were well thought out! The brackets line right up with the stamping in the bed of the truck and the hinge mount is even easier as it has a push pin to line up on the tail gate posts then you just use the self tapping screws that come with it to fasten it and the lock ends to the bed. You DO have to remove the assist handle on the drivers side of the bed to get the drivers side box on!! UPDATE: One thing I found out when Deer season opened. I always load my truck bed with three 94qt. Igloo Ice chest sitting side by side and load a 120qt. Across the back of those. I found out to get the three 94 qt. Chests loaded I had to take both swing out boxes out!!! I didn't notice it at first, but the boxes DO NOT recess in close enough to the inside of the bed and hang out beyond the wheel wells!!! I think on second thought that these could have been better designed to recess in more like they did on the earlier model Chevrolet/GMC's. I also have the multipro tailgate and they fit, they just need a better designed bracket to sit closer to the inside of the bed and not hang out over the wheel wells!

A friend purchased one of these for his new truck, and at the time I didn't think too much of it. However, after adding a tonneau cover to my truck and now having a kid with a permanently mounted car seat base in the back seat, plus an 85lb Golden Retriever that goes pretty much everywhere with us eating up my back seat, getting to the "truck stuff" that I had in plastic bins under the rear seat became an issue as in my truck (2006 Chevy 2500HD) the rear seat has to fold forward to gain full access under the seat. In my case, with the car seat and dog seat cover installed it was a huge PITA to get the seat up all the time, so I remembered my buddy showing me this swing case.Mounting it was extremely simple and easy. Six screws and your done! It looks great, and fits quite a bit of stuff. I keep jumper cables, bungee's, ratchet straps, and a hitch ball in there among other stuff. No more dealing with getting to this stuff under the seat anymore, and it also put all the items that would rattle on bumps out of the cab which was nice too.Definitely happy with the Swing Case, and would recommend to others. As another commenter mentioned and I would like to echo as it was very helpful to me, IF YOU TOW A TRAILER AND HAVE A BED SIDE PLUG DONT GET THE DRIVERS SIDE VERSION. I almost ordered the drivers side version by mistake, but luckily saw the comment and ordered the passenger side one instead. The drivers side one would've blocked my 5th wheel power plug and mean I'd have to remove the swing case each time I towed, which defeats the usefulness of it.

It's smaller than I expected but that's ok. It takes up less room in the bed that way. It's easy to install if you're handy. It comes with a lock that if used, still allows the box to swing out but will not allow the box to be removed. The instructions say it does not work with the undercover hard tonneau cover which I'm hoping is not accurate because I have that tonneau cover. It looks like there's enough clearance to me, without actually putting the tonneau cover on to find out for sure.

The box is great but there are many things I don't like about it and for $200+ I would not recommend it.1. It blocks the light for the bed.2. Because of how the bed is made it does not sit on top of the wheel well and you do loose a few inches of bed space. If you add both sides you loose a lot of bed sapce.Look at pictures.3. You can take it out of the bed and take it with you BUT... no handle to carry. This product claims to hold up to 75 lbs. I cannot imagine being able to load this with 75 lbs and not having some sort of handle to carry it out and since it has an odd shape it would be hard to carry.4. Locks are cheap. Not the quality expected on a $200+ box.5. Cup holders and tray are very shallow. You put any drink there and with any minimal movement it will fall.6. I'd you have a bed cover that you have to hook to the edge of the bed for it to close the box sits too high for the handle to clip onto the bed.Pros:1. Extremely easy install. 5-10 minutes max.2. Holds quite a bit of gear3. The swing out feature is great.UPDATE -After using this item for a few days I can confidently say that it is NOT WORTH IT!If you have a bed cover on your truck DO NOT BUY THIS! You would need to open the cover everytime you want to open the case. The cover get in the way when opening this item. It's just not worth the hazzle or the prize for something not too functional.