M.2 Key A/E to Mini PCI-E Converter Card, Enable NGFF WiFi Cards Like AX210/AX200 on Older Laptops with Mini PCI-E Slot, for Models from 2010-2016

This is a nicely-designed adapter, as many other M.2-to-mPCIe adapters don't include the antenna conversion between the old U.FL and newer MHF4 connectors. Whether or not you can use it, however, greatly depends your PC having the space for a replacement WiFi card that's potentially longer (if the original was half-length) and definitely thicker (at least double, since your new card sits above this adapter).Installation is straightforward, although the tiny MHF4 antenna connectors can be challenging to work with. I'd suggest using a magnifying glass and verifying that the connection is aligned before applying pressure, to reduce potential frustration and/or damage. If needed, for installation in a half-length mini-PCIe slot, the upper part of the adapter snaps off easily (but can't be replaced if you change your mind).Post-installation, my PC had no trouble recognizing the new WiFi card, and I'm enjoying its faster connection speeds. Some laptops might accept only specific white-listed WiFi cards, but such issues are out of the control of this adapter.Overall, I'm happy with the design and functionality of this converter, and it's worth buying as long as you make sure that your laptop/PC has enough spare room to fit it. Recommended.

Worked great in my ancient Dell ES530 with an Intel AX200NGW. My notebook has 3 PCIE slots but I managed to wedge it and into the original Intel Centrini Advanced-N 6205 slot made for wifi. I could have used the full size slot but I had nothing to screw it into. So I wedged it in and it causes a tiny back case bulge but it's almost unnoticeable unless you knew what you were looking for. It took about 5 minutes to get ready, taking the antenna wires and connecting the smaller MHF4 adapters. Then placing the new Intel card into the converter and then connecting extension antenna wires to the larger IPEX UFL to bridge the devices. Then placing the card in it's slot and connecting my notebooks original IPEX UFL antenna wires to the Intel card. Was simple to install and the seller is legit, this m2 wireless to half PCIE card works great and comes with everything you need. I went from getting 20-60Mbps down to getting 600-1000Mbps down (I have an Asus AX88 and Xfinity Gigabit internet). Well worth the $27 (just about $20 for the Intel card and another $7 for this m2 to pcie converter). Shipping was fast and the item was packaged nice and safe. Once booted up Windows 10 64bit alerted me that I now had WiFi 6 and the benefits etc. I got great speeds and even better signal than with my ancient Intel 6205 (N device). I would recommend any day! 5 stars!

Good working well product.

Worked well. I wanted to upgrade my nearly 12 year old computer's Bluetooth from 4.0 to 5.2 and the wifi from 2.4 single band to dual band wifi 6 so I swapped the 1703 the computer came with, with an Intel AX210. Getting all the little antennae plugged in was a challenge due to my hand and finger size but after attaching them using blunt hand tools I was able to fit it all into my Dell XPS 8700's mini PCI slot with this adapter. Interestingly, the same Intel AX210 chip did not work well in the regular PCI slot, causing a range of Bluetooth errors. As such, If you're having issues with the PCI slot cards with antennae attachments in the back, simply take out the Intel chip they come with and use this adapter in your mini PCI slot (if applicable).Note: If you computer has an M2 slot, you don't need this adapter, just use that M2 slot.Overall, I highly recommend this adapter. It can help rejuvenate your old relic of a computer and fix Bluetooth or Wifi problems you may be having. This likely works for most laptops too as long as you have the required 43cm of room.

Works as promised on Dell Latitude

I was not able to install the given 2 black wires to the wifi 6 card nor this adapter. It's just too small to fit it. When i tried without the 2 wires, th computer recognized the wifi 6 card and installed the drivers. But, because of no antenna connection, i am not able to connect to my wifi6 . Back to using a USB AC for now.Update**. Bought a different antenna and connecting the wifi 6 card to the antenna seems to be working now. Bluetooth 5.1 is also working.

Like others have mentioned, the small antenna connectors are a pain but that's not unique to this adapter. Be patient, make sure you have good lighting, and be careful if you decide to use tools. Hook up the small conversion antenna cables before you install your M.2 card. Make sure to download the drivers for the new card first to make the process smoother. In my case, Windows Device Manager recognized the new card/adapter as a generic network/BT device. I pointed Windows to the new drivers I had already download and the card initialized right away. Old card: Intel Dual Band Wireless-AC 7260 (Wi-Fi 5). New card: AMD RZ616 (MediaTek MT7922A22M) Wi-Fi 6E. Motherboard: Gigabyte GA-H97N-WIFI (rev. 1.1).

Have an old Dell Inspiron all-in-one that has two mini PCI Express slots. Wanted to use an m.2 Wi-Fi card and this product allowed me to do that. Comes with lots of screws and two Wi-Fi jumper cables. The board has built-in Wi-Fi cable connectors to allow you to convert between the newer style found on m.2 cards to to the older style found on mini PCI ecards. This let me reuse the built-in Wi-Fi antenna cables which wouldn't normally fit on an m.2 Wi-Fi card.