Rockyin 4 Way Consumer Unit Circuit Breaker Panel 63A 30mA RCD 4MCB 2 * 6A+20A+32A Circuit Breaker Panel, Leakage Circuit Breaker, Circuit Breaker Box,Protective Plastic Shield Circuit Breaker

Very good perfect for the job

Well made and just right for small installations.

This arrived without any linking live bus bar and neutral link to the neutral bar. The earth and neutral (called zero on the enclosed diagram) had only 4 termination points each, there should be a minimum of 5 to avoid doubling up connections. I would have returned this but it was needed urgently and as a qualified electrician I was able to make it usable by installing the missing items which had to be rated at 63amps. This product as I received it is unsuitable for purpose.

Good well made perfect for my log cabin

The unit arrived with no bus bar to join the MCB’s so I had to join them with 6 mm cable, not good. The connectors for the neutral and earth are far too small. Space is tight inside the unit and I struggled with armoured cable.There is no way I would normally install this unit but it was only for a shed so I persevered. Not recommended.

Design was good but it had no busbar or neutral connections,had to buy them which added to the cost

RCD breaker faulty, will need to be replaced as it trips about once per day and kills all electrics in my garden room. Spent ages testing circuits to confirm it was this cheap garage board causing the issue. Not worth the "savings" over a better board, IMO.

To wire this unit up, you will have 5 neutral wires, and 5 earth wire. BUT the connection blocks have only 4 spaces - why not 5, then you would have 1 space for each wire. What a pity, it just makes it more difficult to wire up.Also the plastic box itself, the 'knock out holes' have to be fully drilled out. it is the only way. Also the strengthening ribs inside the box go through the position shown for the 'knock out holes' for the cables going into the unit.