MoesGo WiFi Smart Wall Light Switch,Glass Panel, Multi-Control(3 Way), 2.4GHz Wi-Fi Touch Switches, Neutral Wire Required, Remote Control Smart Life/Tuya App, Work with Alexa, Google Home Black 1 Gang

This thing is great! Not designed for US but still works. Instructions are for European setup, but once you figure it out it's very simple. I had a 4 gang box in wall, and was able to replace with 1 gang box, fill the gapping hole from 4 gang box and it looks and works perfect. PRO TIP for US install: instead of jumping power from 1 switch to another, this has 1 power in (line) and automatically distributes power to other switches. Jump neutrals then plug hot into each individual line out. Very clean wire management.

Five stars because once installed, it operates perfectly and looks pretty cool too. I would remove half a star because it's a little more difficult to install than it could be. Some additional things that I needed that were not included in the package: 1. A 3-inch pigtail wire for the neutral connection (I was able to scrounge through my junk boxes and find a piece of wire to use). 2. Correct size wire nut for neutral connection. 3. Switch plate extension (spacer) plate (Everyone won't need this, but my electrical box was too crowded to fit this new switch. 4. Correct size screws for switch installation. I'm not saying that Moesgo needs to include these things, but a buyer should be aware that they may be needed. As I mentioned, the installation is a little more complicated then replacing a basic single pole switch. If you don't know what you're doing, I highly recommend getting an electrician to do it. Instructions provided are not all that great and assume that you know what you're doing. Before you order the switch, you will want to verify that there is a neutral wire in the box (usually a white wire). Most modern installations will have this, but some will not. You'll need to add a pigtail to connect the neutral wire in the box to the switch. I needed a larger size wire nut to connect the pigtail and get 4 wires on a nut. Also, you will need to verify which of the two black wires is the hot from the breaker panel and which is the wire going to the light. A voltage tester is convenient for this, although I suppose you could do it by trial and error. The Moesgo switch has a pretty fat extended portion on the back that houses the electronics and the relay. My electrical box was already very crowded and once I wired everything up I realized that it wasn't going to fit . There just wasn't enough room in the box to mount the switch flush to the wall. That was a little bit of a bummer because the switch would look sleeker mounted flush to the wall. To be fair, this is not a problem unique to the Moesgo switch. Pretty much any electronic switch or dimmer switch will have the same issue. I purchased this nice spacer plate and it solved my problem well: https://www.amazon.com/gp/product/B085DQ8K5J/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 One more thing. The screws supplied with the switch were not the correct thread for my standard electrical box. Luckily, the spacer that I purchased came with the correct size screws. All of that said, once the installation was complete, the switch works perfectly and flawlessly. I easily synced it with the app and with my Amazon Echo Dot. It works perfectly with Alexa and never fails.

Easy to install and has not failed me in almost 3 years. I definitely recommend this product!

It works great...but the dimmer command isn't working for me.

Great product, stylish at a affordable price.

I LOVE this switch. I am big on smart home items, and even better if they aren't insanely expensive. I tried this out because of the price and it has been outstanding. I've had it installed for 2 years. I love that I can customize the buttons in the app to control different things. When my kitchen lights stopped working, I was quickly able to reprogram the switch to power some floor lamps we were using temporarily (which were already controlled in the smartlife app). I have it in a spot where I only have 1 switch but is central to the front door, kitchen, and living room and I can program all 3 areas to this switch. My only complaint is that once in a while it loses connectivity to the internet (once or twice a year). I haven't figured out how to reset it so it will try to reconnect without actually flipping the breaker, but that could just be user error on my part. All the switches except for the one hard wired will stop working until it's connection is restored. The only other quirk is if the device it is controlling (a light or lamp) loses connectivity or fails, sometimes it's removed from the routine that ties it to this switch and will have to be re-added. That isn't really an issue with this switch, more of a problem with the lamp it contolls that keeps failing and removing itself from the app. If your hesitating, it's worth a try. I got the 4 gang without knowing if I'd need the other 3, and I eventually used them all.

El producto llegó incompleto, le faltan 2 tornillos para poder fijar los cables. Falta instalar para verificar su funcionamiento pero el solo hacho de enviar algo incompleto no deja una buena imagen.

We bought these to try in our master bedroom as a light on each of our sides of the bed. They work amazing! We will be updating all of our rooms.

Me ha salido bien el producto, pero lo que NO me gustó es que no tenga luz en los apagadores indicando si están apagados y tampoco en el icono de Wifi

Este dispositivo no es compatible con protocolo zigbee, si ya tenias con anterioridad algunos de estoy y decides cambiar a zigbee, no te servirán, incluso con el propio hub de MOES. Me hubiera gustado que se iluminaran en color rojo al estar encendida la luminaria, actualmente cuesta trabajo identificar cual está encendido y cual está apagado ya que la luz siempre es azul y es muy tenue. Siempre había comprado esta marca, pero no lo volveré a hacer.

El primer día programe para que apagara y prendiera a la hora deseada y sin problema, perooooooooo al día siguiente la luz encendida sola y obviamente ya no se apagaba pensé que era problema de que yo haya programado así que decidí volver a resetear de nuevo la configuración (ósea no programar el encendido y apagado a la hora deseada) y pues se encendió como 5 veces en el día así que llame a mi eléctrico de confianza pensando que tal vez algo había conectado algo mal, lo checamos y todo bien como lo indica, hasta vimos tutoriales de YouTube y ellos hacían lo mismo todo esta bien, pues no quedando con las ganas llame a otro eléctrico y checo todo y seguía bien, entonces pensé ohhh es el internet y cambie de modem el interruptor y nada seguía igual... entonces pues ya llevo 1 semana y media probándolo y el problema sigue a veces solo prende una vez, otras veces hasta 4 o 5 en fin me di a la tarea de investigar y muchas personas se quejan de este tipo de interruptores otras los aman y pues por lo que he investigado es que lo que ocasiona el show es la aplicación así que intentare con Alexa a ver como nos va y sino pues esperar a que actualicen la aplicación para que ya no pase esto mientras siga así no cambiare mi puntuación.

Tengo alrededor de 10 de diferentes tipos instalados en toda la casa , este es el primero que falla , prende y apaga solo uno de los interruptores

Es muy bonito y muy útil ya que puedes controlar las luces por medio de una app o Alexa el problema es que ya no sirve. Duro un tiempo y dejo de funcionar