Nebula Boost Decarboxylator & Infuser | For Herb Activation & Infusion of Butter & Oils. Simple Operation, Includes Mess Free Container, Sleeve & Updated Lid Design (Green Boost)

I'd like to start this review by stating I do not advocate any illicit drug use... Preparing your ingredients correctly before baking them is an important part of the cooking process. Pre-cooking specific elements of your ingredients takes your baked products from 6 out of 10 to 18 out of 10. Naturally to any mathematician, this makes no sense which is understandable. However what I have found is by deboxellating your 'herbal additions' prior to cooking significantly increases potency. For example using typical standardised measurements I historically consumed 1/2 of a baked cookie which had a nice effect. After preparing the herbal editions using this device, I now only have to consume 1/4 of a cookie for a comparable experience. Yes this device is quite expensive however in the long run, I would suggest it's cost efficient as your additional herbage lasts longer because you don't need as much. The device simplifies the whole debox process without the need to use an oven and potentially incinerate your precious goods. I read somewhere you can also infuse a variety of herbs to oils with this device, I've not tried that yet, but if I ever do I will update my review overall 10 out of 10 can't fault it.

If I could give this 10 stars I would it is amazing definitely better than using an oven and very little smell. I don't agree with the decarb auto settings but manual setting 30 mins 248f perfect every time 👌

For the longest time I was unwilling to pay the money for a decarboxylator but after tiring of the frustration that comes with trying to get consistent results from oven methods of decarbing, I have to say that I'm happy i decided to invest the money. I honestly feel like i've been wasting herb until now with the difference that it makes. The decarbing process is so straight forward. Just set the time and temp (manual suggests ideal time/temp setting for decarb) and you just let it do its thing until the cycle ends. No interfering. No constantly opening the device up to check the product as you would with an oven and then having to worry about the resulting fluctuations of temperature. Minimal smell (only noticeable smell for me comes when I open the device up after the decarb cycle ends). Overall there's a peace of mind that comes with simply being able to just set time and temp and trust this device to do the rest. With not having to constantly doubt whether the decarb process worked, or how much the device smells while running, and then having this impact on the experience you have with your product. The only thing I would think to change is to include more information on infusion in the manual. EDIT: This is a quick update amending and emphasizing a couple of things I've learned with further use of the Boost as well as some further research into the process of infusing oils and incorporating them into edibles. Firstly, when decarbing smaller amounts of herb (around 5g or less) I've had more potent results from using the temp 240f for around 1hr 15mins. However, at this temperature there is a pressure build-up that will cause the lid to pop off and this will dramatically impact the amount of smell released. Secondly, when infusing I've found it best to keep to temperatures between 160-200f. Beyond this there are other things to ensure more effective results from your product: (i) Preferring oils/butter high in saturated fats for active ingredients to bind to (coconut oil is my personal preference); (ii) Adding lecithin to infusion to improve metabolism of fat and increase bioavailability; (iii) Freezing and thawing oil/butter before straining and use; (iv) Being mindful of eating habits and how this can impact metabolism around the time you plan on having your edible product - particularly getting to grips with first-pass metabolism (I'll typically eat at least 2 hours beforehand, get a good exercise session in on the day and make sure I combine oil with a meal/snack that is high in fat.

Very easy to use it decarbs very easily at the touch of a button literally! I also used it to infuse some 50/50 vg/pg mix at 180F to make vape juice using the custom settings and the results were very pleasing,Its very easy to clean the only downside is the loud bleeping for every press of the button when changing temp sets the dog off! (he'll have to go).

Ease of use press button walk away. Infused lavender flowers into oil based liquid for body massage lostions aches snd pains

I have used this product several times now to decarb my herbs and to infuse oils. Very easy to use and gives consistent results. It's great that you can fill it up, turn it on and leave it without having to check in on it. I personally haven't had any issues with the lid coming off, which seems to be a running issue in the reviews. And as for the smell, it's most definitely there, but I found it was no where near as strong or intrusive as when decarbed in my oven. Admittedly item does seem cheaply made, buttons for the timer and temperature have to be pressed in a certain way, however this doesn't effect final product or use of item. A bad point for me was that when delivered there was no discreet packaging, left on my doorstep, letting my nosey neighbours know what I could be up to! 🙄 I feel in a country of prohibition, discreet packaging is vital.

Received 28 Dec 24, broke on 2 Jan 26 after I used on about 6 occasions and halfway through the last session on the electronic display went out no longer working. As electronic function broke, i have no option than to dispose. Back to basics for me. It did it's job the few times it did work though. I also think it's over priced for a simple function.

This is one serious little machine! So happy I bought it, I already have the MBM, But this one is so much better, even though it takes less oil, First of all, you can decarb your material, which comes out perfect! With hardly any smell, then you infuse it with what ever you wanna use and that again is so easy, and the finished product is just amazing! I’ll attach a picture of the oil I made. It’s pure THC oil, using Amnesia haze. Came out perfect!

I had a LEVO 1 a couple years ago and I’d say the smell is comparable if not less with the nebula boost. There is a slight earthy smell when decarbing but not the iconic skunk smell from an oven. Just be sure to push the silicone lid down all the way to make a seal. Some reviews say that the “no smell” is a lie but I’d bet they just didn’t have the lid sealed properly. All in all for under $100 and the ability to decarb and infuse with virtually no smell it’s a excellent buy!

Ottimo prodotto e spedizione veloce

J'ai commandé le Nebula Boost pour décarboxyler et infuser avec un appareil dédié à ce travail spécifiquement et ayant un bon rapport qualité/prix. Le boost est simple à utiliser et permet de régler le timing et la température, marche, arrêt et c'est tout. C'est un vrai décarboxylateur. La notice est en anglais (normal pour un appareil anglais) mais elle est simple. il est livré avec un récipient en silicone, une sorte de bol qui vient recevoir les plantes et l'huile/beurre pour l'infusion (je pensais qu'il fallait l'acheter à part mais non). On peut changer l'affichage de la température en degrés Celsius, l'affichage de base étant en fahrenheit. Pour cela, on appui sur "start/stop" puis, sur "temp+" et "temp-" en même temps pendant 3 trois secondes. Il ne conserve pas le réglage quand on le débranche, mais on ne peut pas tout avoir, dommage. Pour moi, la décarboxylation au four est vraiment aléatoire. J'ai testé sans réussite, avec une grosse consommation d'électricité, des gros arômes dans tout l'appart et avec des effets nuls. Avec le boost, ça a fonctionné du premier coup, sans odeur et sans aucun soucis. L'appareil chauffe un peu au niveau du couvercle mais rien de méchant. Je dirais même que c'est normal. Pour la décarboxylation, j'ai suivi les recommandations de la notice avec 110 degrés Celsius pendant 1H30 avec des fleurs grindées dans la cuve (la cuve sans le bol en silicone). Les fleurs étaient plus sombres mais pas tant que ça. Je pense qu'on peut monter un peu la température vers les 121°c du réglage proposé par la machine dans ses valeurs par défaut, en tout cas à mis chemin (je testerai). J'ai ensuite fait une infusion avec du beurre acheté au supermarché que j'ai mis dans le récipient en silicone. Là, j'ai suivi les conseils de ismoke (dont je recommande le visionnage de sa review pour voir les températures et les temps de chauffe et le fonctionnement de la machine) et j'ai mis à 74 degrés Celsius pendant 2 heures comme dans son exemple. Le résultat était vraiment bien. Rien a redire sur la qualité de l'infusion qui s'est retransformée en un beurre bien vert et jaune et uniforme après un passage au frigo. Pour l'instant, à part quelques pâtisseries, je n'ai fait qu'un essaie et il était satisfaisant. Je dois encore apprendre et je vais progresser. Je ne regrette pas mon achat car j'ai un décarboxylateur et un infuseur qui est bon marché et qui est efficace. Il a l'air solide et il est facile à nettoyer. PS: la prise est française et non anglaise.

Der Nebula Boost ist ein tolles Gerät, wenn man zuhause gleichbleibende Decarb-Ergebnisse wünscht. Ich bin sehr zufrieden mit dem Gerät. Kein Geruch bei Verwendung im Gegensatz zum decarben im Ofen. Ich habe den Nebula Boost jetzt zwei Mal benutzt und bin sehr beeindruckt von seiner Leistung. Das Gerät ist unglaublich einfach zu bedienen. Man muss nur seine Blüten in den Behälter geben, die gewünschte Temperatur und Zeit einstellen und schon kann es losgehen. Vor dem ersten Gebrauch habe ich die Alu- und Silikonbehälter mit heißem Wasser und Spüli gereinigt, damit der anfängliche Geruch nach Plastik verschwindet. Danach habe ich zwei Leerläufe durchgeführt und die Temps überwacht, um sicherzustellen, dass das Gerät richtig funktioniert. Das Decarb-Preset läuft mir persönlich ein bisschen zu heiß und lang. ca.15min Warmup bis 124°C, 60min decarb bei 120-125°C, dann 20min abkühlen. Also stelle ich den decarb Prozess manuell auf 240°F/115°C für 60min ( =ca. 15min warmup, 45min decarb, 20min cooldown). Danach Infusion der Butter, funktioniert gut bei 180°F/ 82°C für 60min.

Works as advertised