Project Box ABS Plastic Black Electrical Boxes IP65 Waterproof DIY Electronic Junction Box Power Enclosure 7.87 x4.72 x2.95 inch (200x120x75 mm)

Works perfectly! Good quality, able to be drilled through as needed without cracking. Durable and size is exactly as described.

Good project box, seals up tight. Heavy plastic. Screw lid.

Solid well made project box that will stand up to heavy use. I used one to configure ground and lightning protection for a transportable amateur radio station.

Nice heavy plastic, water tight project box that seals up tight. It has a screw lid. Works well for intended use.

The price is right. If you've been looking around for a similar project box at any of the electronics suppliers, you know how unbelievably expensive they are. This one is very reasonable in price. However, there are a couple of things you should be aware of, especially if you want the box to be water-tight. It comes with a length of gasket material, but the gasket isn't a fully-formed O-ring. You just have to jam the length of gasket material in the groove in the box and hope it seals properly. Also, there aren't really good drawings for the box available, so if you're designing something to fit inside the box, you'll have to make some measurements when you get the box. No 3D models available, either. Also, there's two threaded standoffs in the bottom of the box, but there's no mention of the thread pitch of the inserts, and it doesn't come with screws for those mounting points inside the box. Well, I figured it out for ya - it takes #8-36 screws, so order some of those when you order the box.Outside of that, the plastic is good quality and sturdy. If you're willing to do without things like proper drawings or an o-ring seal, go for it!

Great project boxes. Have used these for multiple projects over the years. Box itself comes with a water proof lid and a gasket seal around the edge. Box may not be water proof once you cut into it for sensors, wiring, switches, meters, etc... So if you do need it to be water proof make sure all the parts you use are also waterproof. Box lid is thick and even with a dremel and a grinding disc took a while to cut through. Overall a sturdy box for projects.

Worked well, the box is much more rigid than i expected, not sure anyone else would use it for the application i did but it was perfect! No complaints!

Easy to drill into, space is good and I like having Screws instead of snapping on the cover. Takes a bit to get the rubber seal in place but not to difficult if you stretch it while putting it in the groove. I'd say it makes it pretty waterproof. I'm using one outside so if it leaks thru their seal I'll update, if it leaks thru the seal for the holes I made then bad on me.