LG AGM73610701 Genuine OEM Door Catch for LG Washing Machines

So this is a tricky review for me because this hose is of good quality and fits our washing machine but it's not the part that we needed. Our LG top loader started leaking every time we do a load of laundry. After about 2 months of this I finally made my husband look over the machine and we instantly noticed the hose underneath of our washer has a hole in it. So we took that hose off and looked everywhere for part numbers - and never found them. We've even looked online on LG's site for the part information -to no avail. So finally I found this hose on Amazon. It looks like the exact hose we needed so we bought it. Well, this isn't it. This is actually a hose that goes in a different area of the machine. I wanted to return it, but for the price my husband said "let's just keep it, this way we have this one if we ever get a hole in that hose!" ... 3 months later, I've still not found the correct hose. However if this is the one you are needing this is a very thick, durable hose for your machine. It's made w/ thick material!

Easy replacement. Clamps are easy to compress with thumb and finger. Toughest part of the installation was removing the old rubber which had to be peeled off.

I bought 2 hose clamps (screw type) to use instead of the spring clamps that come with it. Original hose was glued in place (with the spring clamps used as extra gripping action I think). Other people said to use hose clamps to ensure grip. I agree since the spring type just felt too loose with all the shaking that goes on. Just don't over tighten. You could find the correct glue used by the factory.

The hose itself was exactly the same as the old one that had sprung a leak, but installation was not as simple as it could have been. The clamps provided (even the old clamps from the original hose) were insufficient to hold the hose in place once the washer was running. The original hose had some kind of gray adhesive that bonded it to the plastic on the pump and bottom of the tub.If you're replacing this, make sure you get some proper hose clamps (the kind that you screw down to tighten), otherwise you WILL have to put some kind of rubber to plastic adhesive there to hold it. The washer design made installation a lot more difficult than it had to be, but the hose itself was not at fault in this case, other than being a little stiff to work with.

I’m glad I was able to pay half the price by purchasing here. Easy to install and stinky mildew smell is gone.

This replacement drain hose is way superior in construction and in thickness than the others sold.I’ve bought the cheaper hoses and they lasted about a year and a half before they split because of because it’s cheaply made…

My old hose split after 10 years of laundry. This hose was an exact match made by LG. I installed it in 20 minutes and my machine was up and running. This hose is at the very bottom of the machine so you have to lean it over on its front to get to. Once you are at the bottom of the machine it is easy to change with a Phillips screwdriver.

This hose is about 2 inches too short. The other hose we dug out of the trashcan after the washer kept pouring water allover the floor after we replaced it and figured out that it was way too short. This is not the right hose. Do not buy this your washer will gush water out even worse than before. Now we're out more money and my husband has run up to lowes to see if he can make one to fit it so that we can finally fix our washer and wash our clothes again. Lg you should be ashamed selling a part 2 inches too short. We used the item number and all to find this. Buyer beware you will be out more money. Go directly to your local repair shop or just call someone. Were ending up paying more than we would to call a handy man just buying hoses to try to fit since lg doesn't make the proper replacement that fits. Very disappointed! And so very angry I now have a piece of tube I can't use and my money went down the drain. Great job lg!