Sew Ready Hobby and Cutting Table, Arts and Crafts Table with 2 Mesh Storage Drawers

My sewing room is also a guest room. In the past, I had to go upstairs to use the dining room table to work on my projects needing more space then back downstairs to sew. This table, now in my sewing room, is amazing with the capability to raise or lower height and has two sides that can be lowered down separately or together for smaller project needs. Also the table can be folded up to store out of the way which is perfect for when my guests visit. I think the price is very fair since it is a quality table with options. The table was easily put together by my husband who with no problem. Lots of screws and parts which make the table sturdy and a great purchase! It is a pleasure to be able to stay in one room to do my projects without having to run up and downstairs always looking for something I forgot! I highly recommend this product!!

This table is fantastic! It provides a large sturdy work space and stores small. It was packaged impeccably with all surfaces wrapped and protected. Assembly was very easy due to good instructions and quality parts. It rolls and moves very easily. I plan to use it in my sewing room but could see many good uses for this table!

I LOVE THIS TABLE. I AM USING IT RIGHT NOW IN THE OFFICE AS A DESK ACROSS FROM MY HUSBANDS. IT IS SO VERCITLILE THAT I CAN USE IT AS A DESK TO WORK DURING THE DAY AND THEN CLEAR IT OFF AND CRAFT TO MY HEARTS CONTENT. I T IS A GREAT SIZE, YOU CAN HAVE ONE SIDE OPEN OR BOTH OR NONE. IT IS STURDY AND CAN HANDLE ALOT OF WEIGHT. IT IS A GREAT VALUE FOR YOUR MONEY. I FIND THE DESK VERY COMFORTABLE TO USE. THE HEIGHT ADJUSTMENT HAS BEEN A LIFE SAVER. SOMETIMES I LIKE TO STAND AND WITH THIS DESK I CAN SIT WHEN I WANT TO AND STAND WHEN I WANT TOO

UPDATE #3: So below I mentioned a wheel broke off of one of the drop leafs, but didn’t knock stars off because I UUUUUSE this table and not gently. I was originally going to figure out a way to change all the wheels to beefier casters, but my dad and I figured out that the piece that holds the wheel in place was plastic and that snapped. Upside is that we were able to take that leg piece, flip it, and the other end had a place for the wheel! So I am currently back to working order. I highly suggest if you move the table around a lot, make sure to regularly tighten up any screws around the legs and wheels. We noticed a lot had started to loosen when we were investigating the wheel situation and that it probably contributed to the break. Again, I am very rough with this table, spinning it regularly on uneven ground with bits of fabric and thread that can easily get caught up in the wheels. UPDATE #2: So I had a wheel break off of my table on one of the collapsible pieces. I’m not taking any stars off, because as I have stated previously, I have really abused this table, including constantly moving and spinning it when doing sewing projects. Scarily, when the wheel fell off, I had two sewing machines sitting on that wing of the table, but luckily I was able to catch the table leaf before it folded down and then yell for help to get my precious sewing machines off. I have plans to fix/mod the wheels as they are kind of small if you are planning to constantly be moving the table about, especially on any kind of uneven surface or with some weight on the tabletop. I think generally the table as is, is still great, this just might be something to consider if you are like me. 😊 UPDATE: I have had this table for quite a while now, and it has been an absolute workhorse for me. I originally bought it for acrylic pouring and working with resin in a limited space in our garage, but I have since also taken up sewing, and I use the bottom shelf to store my sewing machine and the baskets for most of my sewing notions. My dad and I have also used this for projects that require cutting like 3/4” sheets of MDF for a nightstand project I did. Despite this table not seeming like it would be sturdy enough for the abuse I have put it through, it has held up like a champ. This also includes ironing fabric directly on the table (I plan to make a custom ironing pad for the tabletop eventually just haven’t gotten to it yet). When we are doing things like using a circular saw to cut down mdf or plywood, I do take care that the table is clear of where the saw would run as well as try to position thing as close to the center as possible where there is better support. If we have to cut near the edges, I usually add extra support to the wing with my hands or arms underneath while my dad runs the saw. So far this has worked. I wouldn’t put this through any hardcore woodworking/workshop projects, but for occasional small projects it has been awesome. ORIGINAL REVIEW: I just assembled this today. The box that it arrived in did have some minor damage, but luckily there was no real damage to the inside, just some minor scratches from pieces moving against each other, and a few dents on the underside of one of the leafs. Quality: The table tops and lower shelf are obviously made from particle board, so I question the longevity of these pieces, but I managed assembly without breaking any of them. The frame is decent enough. The casters have some chintzy “metal” pieces to them, but they are at least the screw-in type of caster, so I think it will be fine, they just look and feel a bit cheap. The frame overall is pretty solid. Solid enough without being too weighty. Assembly: Instructions were clear and easy to follow. The pieces were clearly labeled, and the screws, nuts, bolts, etc were nicely packaged in a way that had them clearly labeled - but BEWARE! there are NO extra pieces. You only get exactly what you need. The screws were decent, I had no issues with the screw heads being stripped or anything like that, though I did it all with hand tools, no power tools. I think you could risk stripping a screw if you used a power tool with too much torque. I had a couple of issues with alignment of the predrilled holes. One was the center hole on the lower shelf - it did not align at all. Luckily the other four holes aligned just fine (two per side) so I left out that center screw. The other issue was one of the brackets that swings out - just one hole was misaligned juuuuust enough that I couldn’t get the bolt to drop all the way through to attach the nut on the underside. I was able to force it through by using a rubber mallet. Then I was able to attach the nut and tighten it without issue. The other issue was the bolt that is on the underside of one of the leafs does not easily align with the lil socket on the leg. I was able to eventually get it to settle in place, but it really took some finagling. I’m planning to use this for artwork, primarily acrylic pours, and I needed a larger workspace that I could collapse when not in use. I think this will fit the bill. I’m so excited that I can adjust the height (though this is not an easy-peasy task, you will want to plan for it) as my back has been killing me from bending over a small card table too much! I will update after some time has passed and I’ve gotten some use out of this. TIP: Lay a towel of something down in the place you plan so assemble (especially if you do this on the garage floor like me). You assemble a lot of the parts with the laying down, including the entire tabletop being face down - I ended up with some minor scratches on my tabletop since I didn’t think to lay out a towel or something until too late.

I am a quilter, and this makes a very good and functional measuring and cutting table. There is plenty of room for my cutting mat which is about 37" by 25". Leaves plenty of room for a light, supplies, fabric, etc. The adjustable height is great and should work for most people. The two little storage bins underneath are nice, but if you put against a wall, you can only access one of them. If your room is multi-purpose and you need to make more room sometimes, it folds down pretty easily.

La mesa llegó antes de la fecha señalada y en perfectas condiciones. Mi esposo la armó en 45 min. La mesa es grande y resistente. Es muy fácil extenderse y volverse a doblar. Tiene diferentes opciones de altura así que pudimos ajustarla a mis necesidades. Estoy encantada con la compra. 100% recomendable.

I like the adjustable height I’m 5’9” so needle a higher cutting table. Lockable wheels and easy to move round if you have to. When putting together I would work on a hard floor as opposed to carpet. When it comes to fitting the top to the base ( which is done upside down) make sure the tops are fitting snugly before you commit to screwing together.

I'm pretty happy with my new sewing table. It provides great working space for sewing or cutting. It is not too wide when completely folded. And it can be raised up or down - I've been looking for this feature for a long time before I saw this table. I wish it was easier to adjust its height though (with an adjusting mechanism with a lever for example). In this one I need to remove all the screws, have someone lift the table up and hold it while I'm replacing the screws at the desired height. I wouldn't be able to do it alone. But other than that - no complaints so far. The drawers are very cool, they can be pulled out easily and used even when the table is folded. They hang on metal railings (I was worried that they would be attached on some flimsy plastic railings but these look sturdy). I'm also happy with the shelf, because it fits my sewing machine and hides it when not in use.

Es muy bueno se ve bonito y es muy útil para los espacios pequeños. Muy satisfecha

The design of the table is great, but the quality of its finish is not good. It arrived with a broken corner and disfunctional wheels. The edges of the metal parts are very sharp.