2115TiMAX 3/8" Air Impact Wrench, 300 ft-lbs Torque, Titanium Hammer Case, Friction Ring Retainer, Pistol

This has been a really helpful tool. At first I was disappointed I couldn’t get lug nuts off my F-150 but it turns out my pressure was far too low at the tool. Once that was fixed, it takes them off very easily and that’s with 3/8”-1/2” adapters. I took off a wheel in about 30 seconds. For comparison, my Milwaukee Fuel 1/2” stubby impact 12 volt can’t take those lug nuts off and that’s without any adapters. Very small and can fit in tight places. Has helped with a brake job, new wheel bearings, and some suspension replacement for an F150. A lot easier to move around than its big brother 2235 and is the first one I grab generally. Very pleased with the boot cover as well. A little thicker than I thought it would be but protects well

I needed a powerful yet very compact impact for a difficult job (replacing spark plugs on an F150 Triton engine with very tight quarters on the rear cylinders.) YouTube tips suggested using a 3/8 impact. I already owned a 1/2" drive IR impact and love it. This new one was a little spendy (although a super price here on Amazon), so I was leaning toward going the cheap route and getting something from Sears. I'm sure glad I didn't! This thing is the smallest I've found, very light with the Titanium case, and has great power. All of the other reviewers are correct. This is a fantastic tool, and I never have buyers remorse when it's a quality item like this that I will undoubtedly get many years of use out of. My dad always told me to take care of my tools, and my tools will take care of me. This little impact with big impact performance is sure to do just that. Well worth the money even if you don't know what your next job for it might be. Oh, and the ergonomics and conrols on it are great!

Very powerful little gun when combined with the right compressor. I run a 80gallon tank at 175psi and 15cfm at 90psi. This thing breaks bolts lightning fast. It's light weight and ergonomic design make it a pleasure to work with all day. Although it may be small, what it lacks in size it makes up for in torque. I also have a HF 1/2 impact and it is on par with that. I recommend this gun especially for those doing suspension and brake work. As it is small enough and powerful enough to get the job done efficiently (Assuming you are skilled at what you are doing). I would also recommend complimenting this tool with IR 86 piece 3/8 1/2 impact set. They go hand in hand and were made for each other. At this price, you cant go wrong. For the amount and quality you get for your buck, you'd be wasting your time and money with another gun.

Powerful, and light. Plenty of power for the weekend warrior, which is glad I bought the lighter one over the heavier 1/2" drive model. While you're at it, pick up a precision oiler if you don't already have one, the manual recommends oiling 3 places, at least 1 of which requires a precision oiler, and the other is covered up by the protective boot (although there are no holes there, so I don't know what the manual means). Oil your air tools! You can research on your own, but I found that the most popular seem to be Marvel Mystery Air Tool Oil and Lucas Air Tool Oil, both available on Amazon. I needed some quickly, so I just bought Kobalt at Lowes until my Marvel arrived and it works fine. Edit: This thing seems VERY oil hungry. Most people will recommend a few drops before and after use. I'm a weekend warrior so I do not use this for hours on end and oiled it before and every use. Recently it seized up on me. I took it apart and the hammers seemed very well lubricated. So I dumped a significant amount of oil in the inlet and let it sit. Plugged it back in and it spun up slow, then back up to normal speeds. After that I dumped even more oil in while in forward mode, then more oil for reverse just in case. Runs much better. TL;DR Use much more tool oil than normal.

This tool has been incredibly helpful, especially for removing lug nuts on my F-150. Initially, I was disappointed when I couldn't get the lug nuts off, only to realize that the issue was with the tool's pressure being too low. After adjusting it, the tool effortlessly removes lug nuts even with 3/8”-1/2” adapters, allowing me to take off a wheel in just about 30 seconds. In comparison, my Milwaukee Fuel 1/2” stubby impact 12-volt struggled with the same lug nuts, even without adapters.Its compact size makes it perfect for tight spaces and has been a great asset for tasks like brake jobs, wheel bearings, and suspension replacements on my F-150. I find it much easier to maneuver than its larger counterpart, the 2235, making it my go-to choice. Additionally, I am very pleased with the protective boot cover, which is thicker than expected and provides excellent protection.

I use it every day and it works wonders i bought the non muffled version so she Nascar pit ready but does the work

Light weight and very powerful for its size ....great purchase

Bought this to compliment my IR2135Ti impact. I can't get over how much quieter this is compared to the 1/2" version! Typical Ingersoll Rand quality. This is a great size. I can actually see myself using this more than the 1/2" version for more everyday car stuff. Not too heavy and has quite a punch for power.

Muy buena calidad, llegó rápido

Excellent quality well built. This impact gun is small but mighty. Tones of power in a small package. As a professional heavy truck mechanic of 28 years I definitely recommend this product. IMO, Ingersol build the best tools in the business.

Awesome little tool. Did what i expected it to do and more. I see myself using this gun more then my 1/2inch model because of its decent power, light weight and super speed. Ingersol Rand make great products!

Purchased for use in the Heavy Duty/Diesel Truck field and this gun gets the job done! I also carry my 310S for light duty cars and this would work well for either application. IR makes great tools, worth it and less than a snap on gun of the same equivalent.

I left my first Impact Wrench ,same as this one, out in the Shop. It was taken! (Grrrrrr!!) I liked this wrench so much that I replaced it with the same one. It is small, light ,powerful, and held up to working in a Freightliner dealership for a year. It does all that I ask of it. Also, having the direction control on the back of the unit is handy as well. More expensive than others I've seen, but worth it to me.