Creality LD-002H LCD Resin UV Photocuring with Advanced Light Source High Precision and Large Printing 3D Printer, Size 5.12x3.23x6.3 Inch

The media could not be loaded. আমার জুয়েলারি ডিজাইন করার জন্য মেশিনটি কিনেছি,,, আর এই মেশিনটির একপাষ্ট বয় ভিশন প্রয়োজনীয়

Good entry level printer in the category, material seems bit expensive

Item is defective.one side of the display there was a crack and one bubble was also there.The bubble is in the center, so printing will not happend.Crack is in the edge, so thats not much harmfull.By the time we checked the issue, the return window also closed.

It is an good resin printer,in affordable price, it work properly but you not get safety equipment with it which are important if you are work with resin printer.

Bought it about 2 years ago. Best purchase made. Bought a second one today to share the workload. This is an underrated workhorse and very pocket friendly. Truly satisfied with it and hoping the second one does the same as well. A sincere Step up from the LD002R.

So, I've come from "traditional" FDM 3D printers, so this being my first experience with a resin printer, I was apprehensive (from stories on the internet!). I didn't need to worry.Setup------The unit comes mostly assembled, the only part that needs to be set up is the print bed, which apparently comes pre-levelled from the factory. I re-levelled mine, as it appeared to touch the FEP bed on one side more than the other, but adjustment is easy, using the supplied Allen key. The cover that I received with the unit was *slightly* warped (so that it didn't fit too snuggly on one side), but an email to Creality support, and a new cover was dispatched directly, and now fits perfect. The email support was excellent, and hopefully that'll continue, thanks Creality!Printing---------I was apprehensive about working with the liquid resin, but didn't find it too bad as long as I was careful (nitrile gloves are required, and I do suggest some sort of mask to filter some of the fumes, they can give you a bit of a headache!). The printer itself is quite quiet - the motor noise is fairly low.The thing that did surprise me (but it's probably for the best), is that the fan noise is quiet high. The printer has a built in extraction/filter setup, so I guess the high fan speed is needed to pull the air through. The printer does an *excellent* job of removing 99% of resin smell. I was concerned that I'd have to built a purpose-built extraction system, but I can get away with running it with only the window open (wife approved!).The first thing I printed, was the Eifel Tower sample model - it took a while (about 9 hours I recall), but given the size and complexity, I'm not surprised. I also don't think that the model takes into account this models ability to cure each layer faster than other printers - this printer has a monochrome LCD, meaning that less UV is required to cure layers, I think it can do it in 1-2 seconds, rather than 4-8 like others.I've printed other things too, but neglected to take photos of them, some chess pieces, some toy coins, some Warhammer-like miniatures, all came out good. I've had some failures too, but mostly down to how I'd sliced the models.Clean up----------Cleaning is the part that I'd dreaded, but wasn't horrific. Draining the vat of unused resin wasn't a trauma with the supplied filters, and using the plastic spatula made it "ok" removing the somewhat-cured resin that is stuck to the FEP film. I've been a bit heavy handed when cleaning the FEP film, but it's still good, and Creality have supplied a spare FEP film in the box for when that wears out (or I destroy it!).The only thing I'm struggling with (and this is NOT specific to this printer, OR brand), is disposal of the *used* Isopropyl Alcohol from cleaning the resin models. It's not ok to just dump down the drain, and my local authority (like most I suspect) treat it as hazardous waste.Summary-----------Overall, I'm REALLY pleased with the printer, and it works better than I could have expected. The level of support given by Creality has been superb. The printer came very well packaged, with ample padding.The learning curve of using an SLA based 3D printer has been quite high, but Creality have done well producing a consumer-grade printer, given then challenges.

First off, the printer arrived very quickly and extremely well packaged inside the box.As someone who had only printed with fdm before and was completely new to resin printing I thought the jump would be difficult but set up was painless and straightforward following the included instructions with only the build plate to attach. The plate was pretty level from factory but making sure it was perfect was as simple as undoing the four securing bolts, homing the axis in the software and doing the bolts up again - this is essential to get models to adhere to the plate and not fail!Within minutes of unboxing I had models slicing and prints started using the included USB stick.The resin vat is easy to locate into position with little ridges to ensure it's in the right spot and indentations inside the vat make it a breeze to estimate the amount of resin in it. The z axis linear rail made movements smooth and combined with the 2k monochrome screen allowed for precise and fast prints. The touchscreen made it easy to navigate the software and I love that you can see a small render of the print as you're browsing the files.One concern about moving to resin was the smell associated with it but I found the air filter to be great and worked really well at removing most of the smell.The only negatives I would have are the UV resistant lid can sometimes be a little fiddly to get seated all the way round but once on is a perfect flush fit. Also, compared to my ender 3 pros the power cable is a lot shorter so had to use a small extension lead to reach the sockets, but really this is a minor grievance and in no way subtracts from how the machine performs.All in all, the print quality and details you can achieve from this printer are fantastic even straight out the box and is extremely simple and intuitive to use.Included photos to show the out the box print quality with a coin for size reference but honestly the pictures don't do them justice.I'm more than happy with my purchase and highly recommend it!