8-in-1 Torx Screwdriver Set T4 T5 T6 T7 T8 T9 T10 T15 Hex Tip Socket Cap Screw Driver Double-Sided Bits by L2go

I like this set alot. Small size, works well for all of my edc items. The driver is large enough to get a grip and really torque down on some stubborn fasteners. Haven't had issues with twisting or rounding bits like i have in other affordable options.

I needed some small Torx bits to work on my knife collection. This product filled the bill. I was worried that I wouldn't get the right bit size, since I didn't know what size I needed, only that it had to be small. The bits fit the screws, so thank God for that. The only thing that I didn't like was that the bits are not secure in the metal holder you put them in to use. But in my case, I am not moving around, just working in a small area, so I don't have a problem keeping an eye on the bit to make sure it doesn't fall out while I am using it, and even if it did I could probably find it right away. But I can see where that might be a problem for some uses, so I took a star off. But I saw in another review that it is hard to find bits this small, so I feel fortunate that I succeeded on my first try.

I found myself having to disassemble something that used *only* Torx screws, even in corners where I couldn't really measure what size they were.This little thing proved to be a safe bet: not only it's pointy enough that could reach all the way down into the narrow holes I encountered, but it also had all the tip sizes I found out I needed (T4, T6 and T10).If I must find something to complain about, I'll point out that the bit holder (the black thing in the pics) is a little too tight, enough to make me not want to put the bits I'm using back until I'm sure I'm done with them.

I purchased this to use for a vacuum cleaner that requires a T10. I did not buy an expensive one as i was not going to use this regularly. I have been able to use the product successfully. I would highly recommend however if you are going to use this regularly you purchase a better quality one. I received the torx screwdriver with no instructions. One would think it would seem simple but the top/cap of the torx would not come off. Finally I successfully was able to get it off. when I did there were exactly the torx screwdriver sizes as requested. The top has never been able to be put back on the torx screwdriver. It is made very cheaply. Also when you put one of torx on there is nothing to grab or hold it on so it will fall off. That made it very hard to take the screws out but was able to do it just not that quickly. Also I would recommend look for one that is magnetic. I would not recommend the product for long term use. Maybe a few times only. I would consider this more like a disposable torx screwdriver.

These bits might as well have be made out of silly putty; I attempted to switch the clip on my pocket knife using the T6 bit. Put the bit in the screw, made sure it was all lined up, and turned. The star tip of the bit twisted around on itself, and the screw did not budge. The bit literally looked like it melted. Removed it from the screw and was able to snap it off with my thumb. The other reviewers used the words "Sturdy" and "Durable" to describe this product. I will refrain from using the adjectives I'd like to. Maybe i got a dud, but I doubt it. don't waste your time or money. I tried the Husky 8 in 1 Torx set, and it worked fine. It's worth the extra money. Nothing worse than waiting around for something to show up in the mail, only to have it wind up a big steaming pile of @#&%.

It seems a bit flimsy at first since it does make some clunking noises and doesn't feel very durable; however, it held up well for the purpose I bought it for. I needed to clean the fans in my macbook pro and was told I needed to use a T6 torx screwdriver in order to remove the screws on the fans. I liked this the best due to the affordable price and the different sizes of torx screwdrivers it came with. I wasn't looking for anything expensive and high quality since I am far from a do-it-yourselfer. For a quick solution at a cheap price, this is good enough for me!

I needed it to take my hard drive apart, and it did the job perfectly. Very sturdy in your hand while you're using it. It is a very cheaply made product that doesn't come with any instructions but it does the job. Just watch out when after you receive it that you don't think that the bits are missing. They are stored in the handle so all you have to do is pull the tip off. And the tip is put on very firmly so some people might not intuitively figure it out.

Was surprised at some of the reviews this product received. I find it to be very capable of doing what it is designed for. That being saidI find it perfect for the very small screws and was perfect removing screws from a Garmin GPS for repairs. I would not recommend the largestbit as this is a small tool.Dont know why they included that large a bit.