









🚗 Illuminate your Mustang’s legacy with style and precision!
Spec-D Tuning LED Halo Chrome Housing Projector Headlights are a premium, direct bolt-on replacement designed specifically for 2005-2009 Ford Mustang models (excluding Shelby GT500 and factory Xenon). Featuring waterproof, impact-resistant polycarbonate lenses and chrome housing, these DOT and SAE compliant headlights deliver superior durability and modern LED halo illumination, crafted by an ISO-certified manufacturer to exceed OEM standards.
| Brand | SPEC-D TUNING |
| Color | Chrome Housing Clear Lens |
| Specific Uses For Product | Head Lights |
| Vehicle Service Type | 2005-2009 Ford Mustang models only (Not compatible on GT500 Shelby models) (Not compatible on models with factory Xenon headlights) |
| Special Feature | Waterproof |
| Wattage | 1.1E+2 |
| Auto Part Position | Front |
| Lens Color | Clear |
| Lens Material | Glass,Polycarbonate |
| Item dimensions L x W x H | 18 x 16 x 13 inches |
| UPC | 841808126277 |
| Assembly Required | No |
| Manufacturer | SPEC-D TUNING |
| Global Trade Identification Number | 00841808126277 |
| Item Weight | 14 pounds |
| Product Dimensions | 18 x 16 x 13 inches |
| Item model number | LHP-MST05-TM |
| Exterior | Chrome Housing Clear Lens |
| Manufacturer Part Number | LHP-MST05-TM |
| ABPA Partslink Number | FO2503215, FO2503302, FO2503231 |
| Special Features | Waterproof |
X**N
Good shell to remodel, not some you slap in an go with!!!
So my first review got flagged so here's attempt #2:These are not good if you just Wana slap them in bolt on and go... if you have any skill in advancement in "customization" there's are perfect, they fit great in my 2007 mustang 👌the bad: craftsmanship is definitely shoty at best the sealed areas weren't glued properly the lights that came with it are d rank at best, which seem like replacement bulbs for fog lights and they aren't that bright even with the high beams on. And yes there is a major condensation issue but if you know you way around sealant it's easy to pop it apart and re seal it.THE GOOD!!! WHY SHOULD YOU BUY THESE??!?!?I'm glad you asked my opinion, there a great design and they actually fit for a after market kit, I love the aggressive look and the amount of room for my own customizations is just amazing and there cheap and perfect for low budget builds, just not if your a beginner like I said cause your not gunna be happy if you just lookin for something bolt on.
E**E
EZ PZ
Great set of headlights. Great price. Installation was simple fit perfect. A lot brighter than I thought they would be. Extremely satisfied.
S**N
Burn mark from SilverStar zXe Halogen Bulb
First of all I love the way these headlights look I did not receive the wiring that was shown in the manual But was still able to wire the LEDs, The regular headlights just plug right in simple I got condensation a lot of it I pulled the headlights out Checked for leaks the only thing that I suspect is the seals on the back of th checked for leaks the only thing that I suspect is the seals on the back of the headlight for the bulbs I put moisture absorbing pouches in it, I bought SilverStar zXe Halogen Bulb, I did not adjust the beam and when I took The headlights out for the last time I realize there was a small burn mark on one of the lens, looking back I wish I had ordered my headlights off of American muscle because most of those headlights come with warranties and doubt they have condensation problems But I could be wrong. Another point I’d like to make is the vertical LED lights in my opinion are too bright to run with the low beam on I hook them up to my highbeam switch
C**
Lights
One the lights produces moisture, I don’t know how but it does. I work a lot so really don’t have time to go back and forth with things. But it’s the truth. Wish I could switch them out.
M**
Style and quality
I ignored all the negative reviews and went ahead and ordered a pair and I am glad that I did. First off you have to follow the manufacturer directions, they are the same no matter if you pay $100 or $300 you have to seal the units before you install I use clear permeated silicone with the smallest bead and make sure you seep it into the edge where both housing halves meet. Two when you trial fit them to your vehicle make a note where the adjustment screws are located in the back the headlight assembly and use a 1” hole saw to make the necessary holes into your vehicle bulkhead so you can make adjustments after your headlights are installed. At first the halo rings were very dim I replaced the wires with a thicker wire and grounded them independently and they brightened up nicely. Custom parts require custom installations I’ve washed my car several times no fogging no condensation. And they look awesome!
R**K
Awesome product
The media could not be loaded. They look great would recommend. Before you install them make sure you reseal them with silicone for extra protection. They look really good.
H**L
P.O.S.
This product is an absolute piece of junk, I spent the better part of 2 hours installing them on my Mustang to which I install almost 90% of the items that go on this car. After the installation process and having to redo some of the metal work so the Adjustment screws Were accessible without having to tear apart the entire front and again , I didn't find out that the lights are completely out of adjustment. I expect lights to be out of adjustment any time you were play some I have replaced several on several different vehicles I've only had one set of lights actually come in perfectly adjusted it was a miracle common however these were so badd then I had to actually pull them back off a just AM by hand and push them back on and they say deal will not focus correctly for driving without a hazardous Situation, furthermore after the adjustments were as close as I could get so I knew like a drive my car at night which I need to do the light bulbs break I don't even touch them they Just popped and burnt out for no reason, I didn't touch to the bulbs with my greasy fingers I didn't Ark. Anything with a metal object there was no static electrical discharge to cause anything. In closing do not buy these ever
M**E
Looks great, but a little faulty
The lights look awesome, but on one of them the wires from the headlight (not my car, I tested) was faulty so one of my running lights don't cut on.
Trustpilot
2 months ago
2 weeks ago